IQ METER COLLAR

• Integrates the Microgrid Interconnection Device (MID) for grid-independent operation
• Eliminates the need for external consumption CTs for a simpler setup
• Compatible with Form 2S meter sockets up to 200 A
• UL414 safety certified and UL1741 SA/SB compliant
• Provides fault tolerance with redundant power from grid and batteries
• Works with IQ Battery 5P and IQ System Controller 3M
• Supports IQ Battery 10C with IQ Combiner 6C
• Ensures reliable operation with CTRL wiring
• Compatible with TC and DG certified CTRL cable in flex conduit
• TC-ER listed CTRL cable supports exposed runs
• Includes a ½” NPT thread-based junction box with flexible cable management
• Features a manual override lever for emergencies or special use cases
• Provides push button control to enable or disable firmware operation of MID
• Dual LEDs indicate MID relay state, grid power, and system diagnostics
• Backed by a 15-year limited warranty and a 20-year design life

Technical specifications

• Dimensions: 6.9 in x 8.1 in x 5.0 in (175 mm x 206 mm x 128 mm)
• Mounting options:
  • Behind utility meter on meter main combo or standalone meter socket
  • Downstream of the meter or main panel on a standalone meter socket
• Enclosure rating: NEMA 3R (Polycarbonate)
• Weight: 4 lbs
• Supported circuit breakers: Mains: Maximum 200A external
• Maximum continuous current: 200A
• Maximum short circuit current: 22 kA (with external, load-side, overcurrent protection device.)
• Energy meter accuracy: +/- 0.5%
• Overvoltage category: Category IV, Service entrance rated
• Communication interfaces: CTRL wiring

Compatibility

• IQ Battery 5P/10C
• IQ Combiner 5/5C/6C
• IQ System Controller 3M
• IQ Gateway
• Comms Kit 2
• IQ8, IQ7, IQ6 Series Microinverters